User manual
Last updated
Last updated
*The circled part is the switch position, which is on the bottom plate.
CH1 - Use Wireless channel 1
CH2 - Use Wireless channel 2
CH3 - Use Wireless channel 3
*Please do not flip the switch vigorously! A damaged switch will prevent the channel from being set up properly and the keyboard will not work properly！
current version
Long press A + B + 1 - Use Wireless channel 1
Long press A + B + 2 - Use Wireless channel 2
Long press A + B + 3 - Use Wireless channel 3
*Press and hold for 1 second
*Both left and right keyboards need to be set
*Fixed position key combinations, independent of key codes
There are LEDs near the TYPEC connector. A red light indicates charging. A green light indicates a full charge.
*The keyboard currently does not have a power display function.
*Connecting the power cord should show a green light if the battery is not connected.
It is advisable to modify the code if you have the programming ability, otherwise it may lead to unforeseen failures.
In the case of normal keyboard use, set a Reset key (Quantum->Reset) on VIAL, and then trigger the switch at that position. A disk named "IFKB" will appear on the computer, and the uf2 file will be copied to the disk. When the copy is complete, the disk automatically disappears and the receiver automatically reconnects to the computer. If there is a failure in this process, you can repeat the operation. We also set a CLR_EE keycode (User->CLR_EE), which is recommended to be set to the keyboard after updating the firmware, and trigger it once, and the keyboard will clear the settings.
