1.The usb cable can only be plugged into the left keyboard
left --> master
right --> slave (The usb plug is only used to upgrade the firmware)
①Connect to the computer with a data cable
②Double click the button (not single click!)
③Computer will appear a disk named "IFKB"
④Copy uf2 file to the disk and wait for the disk to disappear. The firmware upgrade is successful.
*Both hands need to upgrade firmware. The firmware file is the same file.
3.Pay attention to static electricity
4.Firmware updates log
20260110
20240312
log：Enhanced RGB stability. If the RGB freezes, you can update it.
It is advisable to modify the code if you have the programming ability, otherwise it may lead to unforeseen failures.
1.Install QMK CLI 1.2.0
2.Clone the vial-qmk repo and checkout the correct commit (fcd56b119ea8c60142c9a03e997be5a7acba52b7)
Below is the source code for the keyboard.
1.Install QMK CLI 1.1.2
2.Clone the vial-qmk repo and checkout the correct commit (87c2fc07b6)
We also set a CLR_EE keycode (User->CLR_EE), which is recommended to be set to the keyboard after updating the firmware, and trigger it once, and the keyboard will clear the settings.
